How to Use the New NaviCap, NaviBlind Devices

The device is placed behind the cap in a small pocket. It is a small square box with a recess in the middle. The device is turned on and off as follows:

  • Place and hold a finger over the marked area in the recess.
  • After 2-5 seconds, the device emits two short vibration signals, indicating that the device is on.
  • Follow the same instruction as above. The long vibration signal indicates that the device is off.

Charging the device is as follows:

  • Find the port/entrance to the left of the recess with the touch button.
  • Place the USBC cable into the adapter and connect it to the device. The device will then emit three short vibration signals, indicating that the charging is in progress.